When you see ERR CONNECTION RESET while surfing a few websites in Chrome, it means the browser is unable to establish an stable or no connection with the website you wish to open. While some websites load without issue, some show this error. This article will demonstrate how to resolve Error 101, ERR CONNECTION RESET, The connection was reset in Google Chrome on Windows 11/10/8/7.
When a connection is reset, what does it mean?
When the data received by the peer computer, in this case, you, cannot be processed, a connection reset means. When you get this error notice, you’ll also get the following message:
This website is not available at this time. Error 101 (net: ERR CONNECTIONs RESET): The connection to example.com was broken. The connection was reestablished.
Fix the Chrome error ERR CONNECTION RESET
Here are some options for resolving the Google Chrome Error 101, ERR CONNECTION RESET, The connection was reset error.
- Double-check your network cables, then restart and reconnect your router.
- Disable Proxy
- Reset TCP/IP and flush DNS
- Raise the MTU (Maximum Transmission Unit)
- Turn off the AppEx Networks Accelerator.
- Wi-Fi Profiles Should Be Removed (When connecting to WIFI networks)
- Install the Network Adapter Drivers again.
- Turn off the WiFi Miniport
- Switch to Safe Mode on your browser.
- Use the Chrome Cleanup Tool to clean up your browser.
- Reset Chrome’s settings to default.
As a result, you’ll need to check your PC’s Network settings as well as troubleshoot Chrome.
To figure out what works for you, make sure to reload the page after each modification you make.
1. Double-check your network cables, then restart and reconnect your router.
Basic suggestions, yet they might occasionally be the source of the issue. Check to see if your cables are correctly linked to your computer or router. If you’re using WiFi, you’ll need to restart your router once. Finally, you may always disconnect from the WiFi you’re already using and reconnect later. Make a mental note of the password.
2. Disable Proxy
- To launch Internet Properties, press Windows Key + R, then type “inetcpl.cpl” and press Enter.
- Next, pick LAN settings from the Connections tab.
- Uncheck Make sure “Automatically detect settings” is checked when using a proxy server for your LAN.
- Select Ok, then Apply, then restart your computer.
Make sure to disable off any third-party proxy services you’re utilising.
3. Reset TCP/IP and flush DNS
Websites may fail to resolve because your PC’s DNS still remembers an outdated IP address. As a result, make sure to Flush DNS and Reset TCP/IP.
4. Raise the MTU (Maximum Transmission Unit)
Increasing the internet’s speed is also beneficial. It means that the MTU (Maximum Transmission Unit) and RWIN (TCP Window Receive) parameters can be increased.
- Go to Network & Internet > Ethernet in the Settings menu.
- Write down the name of the active wireless / wired network connection, such as Ethernet.
- Run the command prompt as an administrator.
- In CMD, type the following command and press Enter:
netsh interface IPv4 set subinterface “Ethernet 4” mtu=1472 store=persistent netsh interface IPv4 set subinterface “Ethernet 4” mtu=1472 store=persistent netsh interface IPv4
5. The AppEx Networks Accelerator option should be disable.
Network connections are known to be slow while using AppEx Networks Accelerator. Many users have complained that it reduces network speed by 70% to 80%. It’s recommended to disable this off.
- Select Change adapter options from Settings > Network & Internet > Ethernet.
- Select property from the context menu when you right-tab on your network.
- Locate and deselect AppEx Networks Accelerator.
- Save and leave to see if the error has been fixed.
6. Wi-Fi Profiles Should Be Removed (When connecting to WIFI networks)
When you connect to multiple networks, your PC saves all of them. It will automatically connect the next time you are near that network. One of those networks may have gone rogue and isn’t connecting properly, or it may be constantly disconnecting from that network. It is preferable to delete all WLAN Network Profiles and start again.
7. Drivers for Network Adapters must be reinstalled
If removing WLAN Profiles does not solve the problem, the network drivers are most likely corrupted. For the greatest results, you’ll need to reinstall the network adapters as well as the network drivers. Windows Update will downloads and install the drivers for you right now.
8. Turn off the WiFi Miniport
Select Commands Prompt by pressing Windows Key + X. (Admin).
In cmd, type the following commands, pressing Enter after each one:
stop hostednetwork netsh wlan
set hostednetwork mode=disallow netsh wlan
Exit the command prompt, then hit Windows Key + R to open the Run dialogue box, where you should type ncpa.cpl.
To open Network Connections, press Enter and look for Microsoft Virtual Wifi Miniport, then right-click and choose Disable.
9. Start to Safe Mode in your browser.
Chrome, like Windows, features a Safe Mode in which it runs without any user settings or extensions. You can either start Chrome in Safe Mode manually or via a shortcut to see if your issue is repaired.
10. Use the Chrome Cleanup Tool to clean up your browser.
Use the built-in Malware Scanner & Cleanup Tool in the Chrome browser. It helps in the removal of unwanted advertisements, pop-ups, and viruses, as well as Unusual Startup pages, toolbars, and anything else that degrades the user experience by crashing websites by overloading them with memory requests.
11. Reset Chrome’s settings
This option help in the same way as Windows 10 Reset does. When you reset Chrome, it restores the default settings from when you first installed it. It will, for the most part, disable all extensions, add-ons, and themes. The content settings will be reset apart from that. The site’s cookies, cache, and data will be removed.
What is the top best way to fix the ERR CONNECTION RESET error?
To fix the ERR CONNECTION RESET error in Google Chrome, you can try a few different approaches. For example, you can disable WiFi Miniport, remove proxy, cleanse DNS cache, delete all existing WLAN profiles, and so on. Resetting the Google Chrome browser is the last but not least step.
Why am I getting an error notice every time I use Google Chrome?
Various factors could be to blame for different error messages appearing in Google Chrome. Errors can occur as a result of incorrect settings, extensions, and other factors. To fix the problem on your Google Chrome browser, you must first identify the source of the error.
Let us know which solution to the ERR CONNECTION RESET error in Chrome worked for you.